rc nitro cars

kyosho v one s rc nitro cars

2008-09-15T11:57:00.000-07:00

kyosho v one s is suitable for beginner, come with gs engine(pull start).15 and complete with radio. this rc nitro cars using 3 belt for transfer the power from the engine. normaly it one speed but can be upgrade to two speed. This rc nitro cars suitable for bashing on car park or track. see the video kyosho v one s two speed

video mrx-4 rc nitro car on the track

2008-08-28T10:32:00.001-07:00

watch video mrx-4 rc nitro car in action, its a 1/8 scale and use .21 racing engine

How to play rc nitro cars (RTR) ready to run for first time

2008-07-04T18:50:00.000-07:00

First things should do Check first your rc nitro cars, inspect receiver servo and battery cable connection are properly install. Make sure all are in good condition, inspect all screw are tighten. Inspect the tire if not glue, better do it, its important to avoid tire move out from the rim during rc nitro cars run. Then install new glow plug, better have one more glow plug for spare parts. Install new battery for transmitter and receiver or if you use rechargeable battery make sure it full charge. For receiver if using rechargeable battery make sure using five cell (just get at nearest hobby shop or net). Install new battery at your glow starter. Do testing radio control by switch on transmitter first and then switch on the receiver. Check signal by turning left and right the steering also pull and push the trigger. Make sure the servo for front wheel and carburetor follow the direction while testing done.

Ok, now full the tank rc nitro cars with nitro fuel. Pump nitro fuel until along tube full by nitro fuel only don’t more than that. If you rc nitro cars don’t have tank pump, just simple close the exhaust hole by your finger and pull the starter frequently until nitro fuel full the tube only. Now time to break-in(follow the manual instruction attach while buy rc cars) must do for new engine it is important for engine long life. Carburetor can be adjust for setting nitro fuel and air mixture. Setting the carburetor make it properly. If too rich setting the carburetor this will make the car not power full, can be identify when too much smoke and oil come out from exhaust.

If too lean setting (too low nitro fuel supply to carburetor) were, identify by engine too hot, smoke and oil not much come out the exhaust and engine easy to damage. For know carburetor setting is correct, the best way you must have one temperature gauge for checking the engine temperature (read engine manual, what the recommendation engine temperature) adjust the carburetor until you get that temperature.

When the cars ready now time to bashing. You can play at parking lot or road but beware the real car. For generate skill better play at rc car track. After hours play now time to storage your RC nitro cars make sure clean it first, empty the tank, dismantle battery for transmitter and receiver and make sure your engine piston in freely position just adjust it by your finger at flywheel, rotate the flywheel until it is free. Beware your hands RC nitro cars engine is still hot.

How to play rc nitro cars (RTR) ready to run for first time

2008-06-09T17:31:00.000-07:00

First things should do Check first , make sure all are in good condition , all screw are thighteen. glow plug already install, install new baterry for receiver and transmitter or if you used rechargeable battery make sure it full charge. Install new battery at your glow starter. Do testing radio control by switch on transmitter first and then switch on the receiver. Check signal by Test steering turn left and right and pull and push trigger. Make sure front wheel and carburetor servo follow the direction while testing done.

Fill nitro fuel inside tank, while all done start your rc nitro cars by pull the pull starter lets engine run this is a break-in engine session (follow the manual instruction attach while buy rc cars) your must do first this important for engine life. Carburator can be adjust for setting nitro fuel and air mixture. Setting the carburater rich or lean make it properly. When the cars ready now time to bashing.You can play at parking lot or road but beware the real car . Before storage your rc nitro cars clean it first, empty the tank, dismantle battery for transmitter and receiver and make sure your engine piston in freely position just adjust it by ur finger at flywheel, rotate the flywheel until its free. Beware your rc nitro cars engine is still hot.

really fast rc nitro cars

2008-06-03T09:59:00.000-07:00

here video rc nitro cars, very fast hah! on this speed sure its difficult to controls

Tool and accessories for your rc nitro cars

2008-05-31T01:14:00.000-07:00

When you have your own rc nitro cars you should have basic suitable tool and accessory, what you must have
1. Carrying bag for your rc car nitro cars
2. Carrying bag for your radio transmitter
3. Glow plug ignition
4. Battery charger for transmitter and receiver if you used rechargeable battery
5. Set hexagon screw driver (small)
6. Phillips Screw driver (small)
7. Slotted screw driver (small)
8. Scissor cutter
9. Long nose pliers
10. Combination Plug wrench
11. Fuel bottle 500cc
12. Brush
13. Tool boxes

All of that tool and accessory above is the basic equipment you must have for your rc nitro cars.

rc nitro cars

2008-05-30T19:28:00.000-07:00

rc nitro cars is radio control car powered by nitro. Nitro is the type of the fuel using.Rc nitro car is seems like real car because have a sound, Now days many brand of rc nitro cars in the market you can choose, such like kyosho, tamiya, traxxas and more. For beginner i suggest get ready to run (RTR) type, why? Its more cheaper and complete you only need buy a nitro fuel and battery for transmitter and receiver.When you buy ready to run rc nitro cars you can get:

1. one car kit complete assambled with engine, radio/servo, body
2. Radio transmitter
3. Engine type pull start( you no need to buy starter box)
4. Kit such like fuel bottle,plug spanar

When you alredy familiar handling ready to run (RTR) rc nitro cars now its a good time to you do some upgrading which parts or your rc nitro cars. Or if that ready to run car dont have option part to be upgrade, the better way is buy a new pro kit. Actually in the market when we talk about pro kit, the rc nitro cars is not same like ready to run (RTR). Pro kit more expensive and more durability, you can buy separately transmitter, receiver, servo, engine, kit , body and foam tyre.